Montek Solar X-1000
|MODEL||MONTEK SOLAR X-1000|
|BATTERY CAPACITY||1010Wh (25.9V 29Ah)|
|BATTERY TYPE||Li-ion NCM Polymer|
|CYCLE LIFE||>2000 cycles @ 1C to 80% of initial capacity|
|AC OUTPUT||100-120v / 220-240V, 50/60Hz, 1000W, surge 2000W|
|CIG OUTPUT||12V 10A max|
|DC OUTPUT 1 & 2 (5 5*2.1mm connector)||12V 7A max|
|DC OUTPUT 3 & 4 (5 5*2.5mm connector)||12V 10A max|
|USB-C||5-9-12-15V 3A, 20V 5A|
|USB-A||5V 3A, 9V 2A, 12V 1.5A|
|LED LIGHT||3W with SOS mode|
|DC IN||12-70V 12A 360W max|
|AC IN||100-240V 210W|
|OPERATING TEMPERATURE||-20 ℃ – 40 ℃|
|RECHARGING TEMPERATURE||0 ℃ – 40 ℃|
|STORAGE TEMPERATURE||0 ℃ – 40 ℃|
|DIMENSION||475 x 406 x 120mm|
5 in stock
What’s in the box?
|1.||What kind of the battery chemistry is used? What is the battery life?
X-1000 uses 1C charge/3C discharge Electric Vehicle Li-ion NCM polymer battery cell. It has 2000 cycles @ 1C charge/discharge to 80% initial capacity.
|2.||Can I charge and discharge this simultaneously?
Yes. It supports pass through charging for both AC and DC loads.
|3.||Could I recharge X-1000 by solar charging and AC charging at the same time?
Yes. You could use solar charging and AC charging to charge X-1000 simultaneously. Total input is about 560W max.
|4.||How long does it take to charge X-1000 by solar panel?
It depends on many conditions, like weather, solar panel power, angle etc. Under good conditions, it takes about 7-8 hours if you use 2 x 120W solar panel, and 3.5-4 hours if you use 4 x 120W solar panel.
|5.||How could I set the AC and DC auto off function?
Turn off the main switch, connect the unit to wall socket with included AC charging cable. Long press AC ON/OFF button for 10 seconds, then you could see the setting interface on the screen. Long press 1 second to choose the item you want to set, short press 0.1 second to set the numerical value.